|
Exploit
the power of your existing HART field instruments with the new
Analog I/O Module with HART Protocol —designed specifically for
the ControlLogix platform.
•
Obtain real-time data from your
process instruments and operate a
smart network without the need for
additional wiring.
• Easily
perform setup, calibration,
commissioning and period
maintenance.
Spectrum
Controls' new Analog I/O Modules with HART Protocol enable any
ControlLogix PLC to be the HART gateway for a complete plant
control system. The power of a ControlNet network may provide data
to any workstation on the system. Asset management, system
configuration and maintenance tasks that required personnel to
acquire data fm the factory floor or remote locations may be
easily performed from a single workstation.
Versatility
by providing both analog measurements and HART data in one module.
Modularity
to ensure
compatibility with existing Allen-Bradley I/O chassis.
Exceptional
value by substantially lowering
installation costs. Field devices may be interfaced directly to
the module, eliminating the expense of additional external HART
bridge devices or handheld communicators.
Flexibility
through a wide variety of user
selectable features such as selectable range type, process alarms,
HART variables and filter frequencies. Channel configurable for
input range and HART capability.
Convenience
with the ability to program and monitor
HART devices from a single workstation.
Ease
of installation with support from RSLogix 5000 programming software.
Interfaces
directly with field devices using
standard terminal block connections.
Automatically
detects
HART instruments and reports device specific information.
Producer/consumer
technology to
minimize load on your system. Acquire data via the controller or
talk to the module independent of the controller. This minimizes
system performance impact and processor cycles.
To
review the data sheet,
click
here.
To
review the manual,
click
here.
|
